The advantages of the dust collector product matched with the sandblasting machine are: high dust removal efficiency, generally above 99%, and the gas concentration at the outlet of the dust collector is within tens of milligrams/cubic meter. It has high classification efficiency for sub micron level fine dust, and the air volume range can be expanded. Small ones only take 1 minute of cubic meter, while large ones can reach tens of thousands of cubic meters in just 1 minute. It can be used for dust removal of industrial furnaces and kilns to reduce the emission of atmospheric pollutants.
Simple structure, easy maintenance and operation. On the premise of ensuring the same high dust removal efficiency, its cost is lower than that of electrostatic precipitators. When using high-temperature resistant filter materials such as glass fiber, polytetrafluoroethylene, and P84, it can operate under high temperature conditions above 200 ° C, is not sensitive to dust characteristics, and is not affected by dust and electrical resistance.
Shot blasting machine dust collector, shot blasting machine supporting dust collector product maintenance: regularly check the operation of control valves, pulse valves, and timers. The failure of the rubber diaphragm of the pulse valve is a common fault of the bag filter, which directly affects the cleaning effect. This device belongs to the external filter type, and its skeleton is installed in a bag. It is necessary to check whether the parts that fix the filter bag are loose and whether the tension of the filter bag is appropriate.
Is the support frame smooth to prevent filter bag wear. Clean with compressed air. Therefore, it is necessary to remove oil mist and water droplets, and the oil-water separator must be cleaned regularly to prevent movement mechanism failures and filter bag blockage. Process air volume, pressure, and temperature at each testing point to match the design. After use, by visually measuring the emissions from the chimney, it is possible to determine whether the filter bag has been installed and whether it has fallen, loosened, worn or similar situations after use.